Calibrate X431 Pro / Pro3 Steering Angle Sensor 2012 Ford Mondeo

 

A must read post on how Launch X431 Pro and X431 Pro3 calibrate the 2012 Ford Mondeo steering angle sensor.

I highly recommend X431 Pro and Launch X431 Pro3 for two reasons: One is because it is very easy to use with the touchscreen that is incredibly responsive to movements. Another reason is that there is a guide for the next step on the screen, so it is very user-friendly.

Guide:

1.Select Ford V46.22 (newest version)

This program can test different Ford models. It currently includes PCM, ABS, 4WAL, RCM, EATC, ECS, IABM, RAP, PAM, 4X4, 4WAS, CTM,OTC, ICM, PATS, ARC, LCM, DDM…

2.Connecting Bluetooth.

3Go to menu, tap “Automatically search”.

4.Get Ford Mondeo details, tap “OK” to confirm.

5.Tap “Fuel Type = Gasoline”.

6.Tap “System Selection”.

7.Tap “ABS/TCS (Anti-lock brake system/Traction Control module”.

8.Read out system information.

9.Tap “Special Function”.

10.Tap “Configure the steering angle sensor”.

11.X431 Pops up” Caution: This function will change the status of vehicle.”

12.X431 Pops up “Steering Angle Sensor Calibration” 4 tips.

13.X431 Pops up ” Set ignition switch to ON (Position II). Please

place the key to ON position in order to turn the steering wheel.

14.Pops up ” Rotate the steering wheel through 10 degrees in each direction.

15.It counts down from 4 seconds configuring the module.

16.The ECU configuration completed, the procedure succeeded.

17.Self-test and clear the DTC.

18.Turn the ignition key to OFF to end the test.

Done